UG许可证已经启动为什么还是提示许可证错误-15

NX1847版本,NX许可证已经启动,在进程中可见两个lmgrd.exe和一个ugslmd.exe,许可证环境变量SPLM_LICENSE_SERVER设置正常,可还是提示-15错误,怎么回事?

attachments-2018-09-53OJUEDG5b9a1260f0b75.png

20:11:24 (ugslmd) SLOG: Statistics Log Frequency is 240 minute(s).
20:11:24 (ugslmd) SLOG: TS update poll interval is 600 seconds.
20:11:24 (ugslmd) SLOG: Activation borrow reclaim percentage is 0.
20:11:24 (ugslmd) (@ugslmd-SLOG@) ===============================================
20:11:24 (ugslmd) (@ugslmd-SLOG@) === Vendor Daemon ===
20:11:24 (ugslmd) (@ugslmd-SLOG@) Vendor daemon: ugslmd
20:11:24 (ugslmd) (@ugslmd-SLOG@) Start-Date: Mon Mar 02 2020 20:11:24 中国标准时间
20:11:24 (ugslmd) (@ugslmd-SLOG@) PID: 10496
20:11:24 (ugslmd) (@ugslmd-SLOG@) VD Version: v11.15.0.0 build 215548 x64_n6 ( build 215548 (ipv6))
20:11:24 (ugslmd) (@ugslmd-SLOG@) 
20:11:24 (ugslmd) (@ugslmd-SLOG@) === Startup/Restart Info ===
20:11:24 (ugslmd) (@ugslmd-SLOG@) Options file used: None
20:11:24 (ugslmd) (@ugslmd-SLOG@) Is vendor daemon a CVD: No
20:11:24 (ugslmd) (@ugslmd-SLOG@) Is FlexNet Licensing Service installed and compatible: No
20:11:24 (ugslmd) (@ugslmd-SLOG@) FlexNet Licensing Service Version: -NA-
20:11:24 (ugslmd) (@ugslmd-SLOG@) Is TS accessed: No
20:11:24 (ugslmd) (@ugslmd-SLOG@) TS access time: -NA-
20:11:24 (ugslmd) (@ugslmd-SLOG@) Number of VD restarts since LS startup: 0
20:11:24 (ugslmd) (@ugslmd-SLOG@) 
20:11:24 (ugslmd) (@ugslmd-SLOG@) === Network Info ===
20:11:24 (ugslmd) (@ugslmd-SLOG@) Listening port: 49980
20:11:24 (ugslmd) (@ugslmd-SLOG@) Daemon select timeout (in seconds): 1
20:11:24 (ugslmd) (@ugslmd-SLOG@) 
20:11:24 (ugslmd) (@ugslmd-SLOG@) === Host Info ===
20:11:24 (ugslmd) (@ugslmd-SLOG@) Host used in license file: PC2020
20:11:24 (ugslmd) (@ugslmd-SLOG@) HostID node-locked in license file: ID=20170101 
20:11:24 (ugslmd) (@ugslmd-SLOG@) HostID of the License Server: "e86f3806a023 e86f3806a023 e86f3806a024"
20:11:24 (ugslmd) (@ugslmd-SLOG@) Running on Hypervisor: Not determined - treat as Physical
20:11:24 (ugslmd) (@ugslmd-SLOG@) ===============================================
20:15:03 (lmgrd) SHUTDOWN request from 17373 at node PC2020
20:15:03 (lmgrd) lmgrd will now shut down all the vendor daemons
20:15:03 (lmgrd) Shutting down ugslmd pid=776 because of signal 15
20:15:03 (ugslmd) TCP_NODELAY NOT enabled
20:15:03 (ugslmd) Shutdown callback to be invoked.
请先 登录 后评论
学技网

2 个回答

老叶 - NX网、学技网、UG爱好者论坛创始人
擅长:NX软件

可能是NX许可证通讯端口被占用。

解决方案:

将当前许可证端口更换成其它的,比如你现在是NX1847版本,默认的是27800端口,现在可以将它改成28000端口。

注意,端口有两个地方要修改。

1、NX许可证文件里面的端口,在已经在运行,注意是已经安装上的许可证程序路径下的许可证文证文件,用词本打开它,看到下面几行有显示端口号的地方,将原先的端口号改一下,NX1847默认是27800,将它改成28000,注意两边的空格不要误删除。

2、将NX许可证环境变量值端口号改了,比如环境变量SPLM_LICENSE_SERVER默认的变量值是27800,现在可以将其改成28000,就可以 了。

PS::改完以后不要做其它重启UG许可证的操作!请直接重启电脑!即可生效。如果是低版本的UG软件,环境变量可能是UGS_LICENSE_SERVER,反正都 一个意思 。还有,现在举例的是NX1847版本,其它版本也类似,如果你原先是28000端口,可以换成27800端口试下,要举一反三。

请先 登录 后评论
吴江


先卸载许可证服务,然后手动添加老叶NX6-NX12通用许可证文件即可 ,亲测有效

attachments-2020-04-EbOcGthq5e85fd76a6d3d.jpgattachments-2020-04-SJPJmKzs5e85fd8cbe8ac.jpgattachments-2020-04-s1TYfhNf5e85fd98d1e53.jpgattachments-2020-04-s6hCaOTw5e85fda235fe9.jpgattachments-2020-04-MVb35x5d5e85fdaa7452e.jpgattachments-2020-04-CAoRk8oF5e85fdb377f49.jpgattachments-2020-04-9AhuAieM5e85fdc0254ea.jpg

请先 登录 后评论